Employers dealing with COSHH are not usually looking for theory. They are dealing with substances that are already part of their operations, and the question is how those substances are being controlled in practice. The risk does not sit in the label or the data sheet. It sits in how materials are handled, used, and interacted with during day-to-day work.
Under UK health and safety law, COSHH is one of the clearest examples of how broad duties translate into specific actions. It requires employers to assess exposure, understand how harm could occur, and put controls in place that are proportionate to the risk. This is not a one-off exercise. It is part of ongoing risk management, aligned with how work is actually carried out.
Where COSHH arrangements are effective, they reflect real working conditions. Assessments are specific, controls are visible, and risks are understood by those carrying out the work. Where they fail, it is usually because they are treated as generic documents rather than practical tools.
Key Takeaways:
- COSHH assessments focus on controlling exposure to hazardous substances, not just identifying them
- A substance only becomes a risk when there is a realistic route of exposure, such as inhalation or skin contact
- Employers must carry out suitable and sufficient COSHH assessments that reflect real working conditions
- Generic or template-based assessments often fail because they do not match how work is actually carried out
- Effective COSHH management requires applying the hierarchy of control, prioritising elimination, substitution, and engineering controls over PPE
- Control measures must be visible, practical, and consistently followed, not just documented
- COSHH applies to a wide range of substances, including dusts, fumes, vapours, and by-products of work processes
- Assessments must be reviewed and updated regularly, especially when processes, substances, or conditions change
- COSHH should be embedded into day-to-day supervision, training, and risk management, not treated as a one-off exercise
What is a COSHH Assessment and When is it Required?
A COSHH assessment is the process used to identify and control risks from substances that can harm health. It sits under the Control of Substances Hazardous to Health Regulations and forms part of an employer’s wider duty to manage risk. The requirement is not limited to obvious chemicals. It applies wherever substances could cause harm through how work is carried out.
The key point is that risk is created through exposure, not simply presence. A substance only becomes a COSHH risk when people can inhale it, come into contact with it, or otherwise be affected during work activities.
| Area | What COSHH Requires | What This Means in Practice | Typical Examples | Relevant Regulation |
| Definition (COSHH) | Control of Substances Hazardous to Health | Identify substances that can cause harm through exposure during work | Cleaning chemicals, solvents, adhesives | COSHH Regulations 2002 |
| Legal Duty | Assess risks from hazardous substances | Employers must evaluate exposure risk and implement controls | Workplace cleaning, manufacturing, maintenance tasks | COSHH Reg 6 |
| Types of Substances | Includes chemicals, dusts, fumes, vapours, biological agents | Not limited to labelled products. Includes by-products of work processes | Wood dust, welding fumes, silica dust, bacteria | COSHH Reg 2 |
| Exposure Routes | Consider how harm occurs | Inhalation, skin contact, ingestion, injection | Dust inhalation, skin contact with irritants | COSHH Reg 6 |
| When COSHH Applies | Where substances are used, stored, handled, or generated | Applies across all stages of work activity, not just use | Storage areas, mixing processes, cutting operations | COSHH Reg 6 |
| Risk vs Presence | Focus on exposure, not existence of substance | A substance only presents risk if workers can be exposed to it | Sealed vs airborne materials | COSHH Principle |
| Work Activities | Assess how substances are used in real tasks | Consider frequency, duration, method of use, and environment | Spraying, pouring, cutting, heating materials | COSHH Reg 6 |
| Who is Affected | Identify those at risk | Employees, contractors, visitors, and others affected by work | Cleaners, operators, maintenance staff | HSW Act / COSHH |
| Control Requirement | Prevent or adequately control exposure | Apply hierarchy of control, not just PPE | Extraction systems, substitution, safe handling | COSHH Reg 7 |
| Link to Employer Duty | Part of broader risk management duty | COSHH integrates with general risk assessments and site controls | Workplace safety systems | HSW Act 1974 |
A COSHH assessment is not about listing substances. It is about understanding how exposure happens and what needs to be controlled to prevent harm. When applied properly, it reflects the reality of the work being carried out, including how substances are used, who is exposed, and under what conditions.
Employers should be able to show that substances have been properly assessed, that exposure routes are understood, and that controls are in place and working. This is what demonstrates compliance in practice. Not the presence of a document, but clear evidence that risks from hazardous substances are being actively managed and kept under control.
What Makes a COSHH Assessment “Suitable and Sufficient”?
The requirement for a COSHH assessment to be “suitable and sufficient” is central to compliance, but often misunderstood. It does not mean detailed for the sake of it, or overly complex. It means the assessment is accurate, relevant, and capable of controlling the risk in practice.
A suitable and sufficient COSHH assessment reflects how substances are actually used, how exposure occurs, and what controls are needed to prevent harm. It should give a clear, workable picture of the risk, not a generic description. Where this standard is not met, the issue is rarely missing paperwork. It is that the assessment does not match reality.
| Area | Legal Expectation | What This Means in Practice | Common Failure Point | Relevant Regulation |
| Suitable and Sufficient Standard | Assessment must adequately address the level of risk | Focus on significant risks, not unnecessary detail. Clear, usable controls | Overly basic or overly complex assessments | COSHH Reg 6 |
| Exposure Identification | Identify how exposure occurs | Consider inhalation, skin contact, ingestion, and accidental exposure | Exposure routes not properly assessed | COSHH Reg 6 |
| Who is Affected | Identify persons at risk | Consider employees, contractors, vulnerable persons, frequency of exposure | Assumptions made without considering actual workforce | COSHH / HSW Act |
| Task-Specific Detail | Reflect how work is carried out | Assessment aligned to real tasks, methods, environment, and conditions | Generic assessments copied across multiple tasks | COSHH Reg 6 |
| Control Measures | Define adequate controls | Controls must be practical, visible, and achievable within the work activity | Controls listed but not applied on site | COSHH Reg 7 |
| Use of Safety Data Sheets | Inform assessment, not replace it | SDS used as a reference, not copied directly into assessments | Copy-paste SDS with no interpretation | COSHH Guidance |
| Generic vs Specific Approach | Assessments must reflect actual risk | Adjust for site conditions, equipment, handling methods, and exposure duration | Off-the-shelf COSHH templates used unchanged | COSHH Reg 6 |
| Frequency and Duration | Consider level of exposure | Assess how often and how long workers are exposed to substances | No consideration of repeated or prolonged exposure | COSHH Reg 6 |
| Workplace Conditions | Reflect real environment | Ventilation, space, temperature, and layout considered in controls | Controls not suited to actual workplace | COSHH / HSW Act |
| Implementation of Controls | Ensure controls are applied | Supervision and monitoring confirm controls are followed in practice | Controls exist only within documentation | COSHH Reg 7 |
A COSHH assessment only meets the required standard if it works in practice. It should clearly show how exposure is controlled, who is at risk, and what measures are in place to prevent harm. If those controls are not being followed, the assessment is not sufficient, regardless of how detailed it appears.
Employers should be confident that their COSHH assessments reflect real working conditions and support how work is actually carried out. This is what regulators look for. Not perfect documentation, but evidence that risks are properly understood, controls are appropriate, and exposure to hazardous substances is being effectively managed.
COSHH Control Measures in Practice
A COSHH assessment only has value if it leads to effective control of exposure. The focus is not on identifying risk alone, but on what is put in place to manage it. Control measures need to reflect how substances are actually used and how exposure occurs during work.
In practice, this means applying a structured approach to control, supported by clear instructions and active supervision. Controls should be visible, understood, and consistently followed. Where they are not, the assessment itself becomes ineffective. The key test is simple: are the measures in place reducing exposure in real working conditions, not just on paper.
| Area | Legal Expectation | What This Means in Practice | Common Failure Point | Relevant Regulation |
| Elimination / Substitution | Prevent exposure where possible | Remove hazardous substances or replace with less harmful alternatives | Hazardous substances retained without review | COSHH Reg 7 |
| Engineering Controls | Control exposure at source | Use extraction systems, ventilation, enclosed processes, or isolation | Reliance on PPE instead of engineering solutions | COSHH Reg 7 |
| Administrative Controls | Manage how work is carried out | Safe systems of work, clear procedures, restricted access, task planning | Procedures not followed or not aligned with actual tasks | COSHH / HSW Act |
| Personal Protective Equipment (PPE) | Provide PPE where risk remains | PPE used as last line of defence, suitable for task and properly maintained | PPE relied on as primary control measure | COSHH Reg 7 / PPE Regs |
| Storage of Substances | Store safely to prevent risk | Segregation, secure storage, correct containers, clear identification | Poor storage leading to leaks, spills, or misuse | COSHH Reg 6 |
| Handling Procedures | Control risk during use | Safe handling methods, minimising exposure during transfer or use | Informal handling practices developing over time | COSHH Reg 7 |
| Labelling and Identification | Ensure substances are clearly identified | Clear labelling, hazard information available and understood | Unlabelled or incorrectly labelled containers | COSHH / CLP Regulations |
| Exposure Monitoring | Monitor where necessary | Air monitoring, health surveillance where exposure risk justifies it | No monitoring where exposure risk is significant | COSHH Reg 10 |
| Clear Instructions | Provide information and instruction | Workers understand risks, controls, and correct use of substances | Instructions unclear or not communicated effectively | HSW Act / COSHH |
| Supervision | Ensure controls are followed | Active oversight to confirm controls are applied consistently | Controls drift over time without supervision | COSHH / Management Regs |
Control measures are only effective if they are applied consistently and reflect how work is actually carried out. It is not enough to define controls within an assessment. Employers need to ensure those measures are in place, understood, and maintained through supervision and regular review.
You should be able to see control on site or in the workplace. Substances are handled correctly, exposure is reduced, and workers understand what is expected of them. This is what demonstrates compliance in practice. Not the presence of control measures in a document, but clear evidence that they are being used and are working as intended.
Reviewing, Maintaining, and Managing COSHH Over Time
COSHH does not end once an assessment is completed. Workplaces change, processes evolve, and new substances are introduced over time. If assessments are not kept current, they quickly lose relevance. Maintaining COSHH means ensuring it continues to reflect how work is actually carried out, not how it was originally planned.
In practice, this requires ongoing attention. Risks need to be revisited, controls checked, and arrangements updated as conditions develop. COSHH should sit alongside wider risk management, not separately from it. When it is actively maintained, it supports consistent control. When it is left unchanged, gaps begin to appear.
When COSHH Must Be Reviewed
COSHH assessments should be reviewed whenever there is a change that could affect exposure to hazardous substances. This includes the introduction of new materials, changes to processes, or adjustments to how substances are used. Incidents, near misses, or signs of ill health should also trigger a review.
The aim is to ensure that assessments remain accurate and controls remain effective. Where reviews are not carried out, risks can develop without being recognised. Over time, this leads to assessments that no longer reflect the reality of the workplace. Regular review is what keeps COSHH aligned with changing conditions.
Integrating COSHH into Day-to-Day Management
COSHH should not sit in isolation from other health and safety arrangements. It needs to be integrated into risk assessments, training, and supervision so that controls are consistently applied. Workers should understand the substances they are using, the risks involved, and the measures in place to protect them.
Supervision plays a key role in maintaining this link. It ensures that controls are followed and that any changes in how work is carried out are recognised early. When COSHH is embedded into daily activity, it becomes part of how work is managed, rather than a separate administrative task.
Common COSHH Failures in Practice
A common issue is COSHH information becoming outdated. Assessments are completed, stored, and then not revisited as work changes. New substances may be introduced without assessment, or existing controls may no longer reflect how tasks are carried out.
Another failure point is treating COSHH as a document rather than a process. Where this happens, controls exist on paper but are not applied in practice. This creates a gap between compliance and actual risk control. Maintaining COSHH requires ongoing attention, not just initial completion.
COSHH as Ongoing Risk Management
COSHH should be viewed as part of a wider approach to managing risk. It supports how hazardous substances are controlled alongside other workplace risks, rather than operating separately. When maintained properly, it helps ensure that exposure remains controlled as work evolves.
Employers should be able to demonstrate that COSHH arrangements are current, relevant, and applied in practice. This includes showing that assessments are reviewed, controls are maintained, and risks are understood by those carrying out the work. That is what defines effective COSHH management over time.
Putting COSHH Into Practice
COSHH is not about producing paperwork. It is about controlling exposure in a way that reflects how work is actually carried out. The assessment is only one part of that process. What matters is whether substances are being handled safely, whether exposure is understood, and whether controls are working in practice.
Employers should be in a position where COSHH arrangements are clear, relevant, and easy to apply. That includes being able to recognise when an assessment is too generic, when it does not reflect the task, or when controls are no longer aligned with the way work is being done. Confidence comes from knowing that what is documented matches what is happening on the ground.
Where COSHH is working properly, it is visible. Substances are managed correctly, controls are followed, and risks are kept under control as conditions change. Where it is not, the gap is usually between documentation and reality.
THSP works with employers to close that gap. From carrying out COSHH assessments that reflect real working conditions, to supporting implementation through training, review, and ongoing advice, the focus is on making control work in practice.
If you want confidence that your COSHH arrangements are effective, not just compliant, speak to THSP for a practical review and clear next steps.
Frequently Asked Questions About COSHH Assessments
What is the first step in a COSHH assessment?
The first step in a COSHH assessment is identifying hazardous substances used, stored, or generated through work activities. This includes not only labelled chemicals, but also dusts, fumes, vapours, and by-products of processes. The focus should be on where exposure could occur, rather than simply listing substances present in the workplace.
What is a COSHH assessment form?
A COSHH assessment form is a structured document used to record how risks from hazardous substances are assessed and controlled. It typically includes details of the substance, how it is used, exposure routes, who may be affected, and the control measures in place.
The form itself is not the assessment. Its value depends on whether it reflects real working conditions and supports effective control of exposure.
What should a COSHH risk assessment include?
A COSHH risk assessment should include:
- The hazardous substance and how it is used
- How exposure can occur (inhalation, skin contact, ingestion)
- Who may be exposed and how often
- The level and duration of exposure
- Control measures in place, following the hierarchy of control
- Any required PPE, monitoring, or health surveillance
- Clear instructions for safe use, handling, and storage
The key is that it reflects actual tasks and working conditions, not a generic template.
How often should COSHH assessments be reviewed?
COSHH assessments should be reviewed whenever there is a change that could affect exposure. This includes new substances, changes to processes, different working conditions, or following incidents and near misses.
Even without obvious changes, assessments should be reviewed periodically to ensure they remain accurate and aligned with how work is carried out.
What does a COSHH assessment cover?
A COSHH assessment covers the risks to health from hazardous substances and how those risks are controlled. This includes identifying exposure routes, assessing who may be affected, and putting measures in place to prevent or adequately control exposure. It applies to all stages of work, including use, handling, storage, and disposal of substances, as well as any by-products created during processes.